Picatinny STANAG Long (14.9") Top Rail Hi-Point 995TS & 3895TS Rifles

• Machined from 6061-T6 aluminum to Picatinny (MIL STD-1913) / STANAG 2324 & 4694 specifications
• Hard anodized per MIL-A-8625F TYPE III CLASS 2 BLACK
• Compatible with 995TS & 3895TS (See SKU SR-HP4x95TS-TE-BLK for 1095TS/4095TS/4595TS compatible version)
• Best in class length - 378mm (14.9") provides 35 NATO standard recoil slots of accessory rail space
• Optional adapter (SKU SA-HPxx95TS-OEM & SA-HPxx95TS-OEMT) available to mount OEM rear peep sight to replacement rail and front open sight post adapter (SKU SA-HPxx95TS-OFS) enables precision co-witnessing of a variety of standard optics and iron sights

Replaces injection molded plastic "Weaver" rail with precision aluminum Picatinny (MIL-STD-1913) / STANAG (2324 & 4694) accessory rail. Have you purchased a great optic for your Hi-Point rifle only to find that it either won't fit the profile of the rail properly or there is not enough open rail space to mount it? This replacement rail will solve your compatibility woes. The original factory rail incorporates "Weaver" type recoil slots that are too small for MIL-STD/STANAG recoil bolts & rods. The injection molded plastic rail has proprietary spacing and protrusions from the surface that interfere with standard accessories. Furthermore, the factory rail has inconsistent clamping surfaces and often significant warpage and bow over its length.

Simple installation - no permanent modifications required to original firearm. Retains use of original factory mounting hardware but trades the factory rail lock on the rib in favor of two low profile socket head cap screws used to secure forward portion of the extended rail. Maintains original height (+0.3mm higher than factory plastic) from receiver shroud top to accessory rail top. The slots in the extended rail are positioned such that they are consistent with the positions in our side and bottom replacement rails.

This rail includes a precision machined aluminum riser that replaces the plastic “Rib” on the Forend Cover. The aluminum riser provides a strong, flat surface on which the forward portion of the extended top rail is securely fastened. The design of the riser allows the length of the extended top rail to be longer (378mm) than other solutions while matching the design and integrating flawlessly with the existing rifle stock. The riser is extensively machined to minimize weight while retaining strength and rigidity. This is the same riser as is supplied with our front extension rail.

If it is desired to mount the factory rear peep sight, the same optional OEM sight adapter (SKU SA-HPxx95TS-OEM) designed for our standard rails fits this rail as well. Likewise our front sight post conversion (SKU SA-HPxx95TS-OFS) will increase the front sight post tip height so that many standard BUIS and optics can be properly co-witnessed. Alternately, the upper portion of the factory front sight can be removed and any pair of standard iron sights and other optics can be mounted to the extended rail.

For those wanting to retain the use of the factory rail lock and still would like a little more space for accessories, please see our extended front rail (SKU SR-HPxx95TS-FX-BLK) for a replacement riser solution including a 125 mm long extension rail.

Please note that this SKU is designed to fit the 995TS and 3895TS. If you require an extended top rail for your 4095TS, 4595TS or 1095TS please see alternate design (SKU SR-HP4x95TS-TE-BLK).

Ships with all required mounting hardware. Hex key included.

Rail weight: 108 gm / 174 gm with riser and hardware.

<p>Manufactured in the Sierra foothills - USA.</p>